SCCY 2

For the general discussion of SCCY Industries firearms. Includes the SCCY CPX-1 & CPX-2 compact 9mm and CPX-3 subcompact .380 ACP handguns.

SCCY 2

Postby DEVIL DOG » Wed Sep 27, 2017 10:32 pm

I have 2 SCCY 9mm. The first one which is the black on black, has never missed a beat. Picked up another one, grey frame & black slide. The grey one hangs up alot & won't go into full battery. Give it a little push & it goes in. Tried using 124 grain ammo tonight & it still hangs up. Thinking it may be a mag issue. Next time out I will try to isolate the offending mag. I have 7 mags total.

Anyone have any other ideas what could be causing this issue?
SEMPER FIDELIS YEMX


45 & COUNTING
DEVIL DOG
New Member
 
Posts: 4
Joined: Sun Jun 05, 2016 4:51 pm

Re: SCCY 2

Postby getvicious » Thu Sep 28, 2017 12:52 am

Call SCCY about this. If you isolate a bad magazine, it's under warranty too. I've seen where SCCY has sent replacement slide assemblies to people with that issue (not going into battery).
It's not the blast that kills you - It's the tumble to the bottom of the 800 foot crater.....
getvicious@yahoo.com
User avatar
getvicious
Topic Moderator
 
Posts: 3106
Joined: Sat May 08, 2010 10:16 pm

Re: SCCY 2

Postby frank » Thu Sep 28, 2017 7:27 am

i had a bad mag with my new cpx-2 several months ago . cartridge ( federal 115grn. ball ) would stick in a nose down attitude
occasionally and fail to feed. called up the good folks at sccy customer service and they sent me a new one immediately and a
prepaid envelope to return the bad one . i have started spraying the inside of my mags with dry teflon spray from time to time ,
and think it helps . wish mec gar made sccy magazines , bad mags seem to have given the guns a bad rep----------------
frank
Forum Regular
 
Posts: 44
Joined: Sun Aug 27, 2017 9:54 am

Re: SCCY 2

Postby DEVIL DOG » Fri Sep 29, 2017 10:47 am

Thanks guys. Going to my cabin some time in Oct. Will have plenty of time to play around with it. Being in a paid range with the clock ticking is not good for solving problems. Thinking I could try swapping slides since they are clones.
SEMPER FIDELIS YEMX


45 & COUNTING
DEVIL DOG
New Member
 
Posts: 4
Joined: Sun Jun 05, 2016 4:51 pm

Re: SCCY 2

Postby Newhouse44 » Fri Oct 20, 2017 9:12 pm

Run some +P thru her ...
Newhouse44
New Member
 
Posts: 10
Joined: Sun Aug 20, 2017 5:28 pm

Re: SCCY 2

Postby DEVIL DOG » Sat Nov 11, 2017 4:06 pm

Contacted SCCY about the mags. They sent me 2 new one's & a return label for the bad ones. Got an email, problem was with the feed lips. Haven't had a chance to shoot it again, so will see. Great service. :D :D :D
SEMPER FIDELIS YEMX


45 & COUNTING
DEVIL DOG
New Member
 
Posts: 4
Joined: Sun Jun 05, 2016 4:51 pm

Re: SCCY 2

Postby bill35738 » Mon Nov 20, 2017 8:33 pm

Give your feed ramp some TLC also,it helped alot with mine!
bill35738
New Member
 
Posts: 7
Joined: Thu May 25, 2017 7:54 am
Location: Butler Co. PA.

Re: SCCY 2

Postby getvicious » Tue Nov 21, 2017 12:03 pm

bill35738 wrote:Give your feed ramp some TLC also,it helped alot with mine!

Good point on the feed ramp. I polished mine to a mirror finish before I ever fired my CPX when SCCY sent it to me in 2012. Never have had any feed issues. Can't say for sure it's the reason but I'm sure it has helped.
It's not the blast that kills you - It's the tumble to the bottom of the 800 foot crater.....
getvicious@yahoo.com
User avatar
getvicious
Topic Moderator
 
Posts: 3106
Joined: Sat May 08, 2010 10:16 pm


Return to SCCY Firearms General Discussion

Who is online

Users browsing this forum: Bing [Bot] and 1 guest

Join Florida Carry
cron