Fobus holster for CPX-2

User Reviews of Shooting Products and Accessories. New holster, mag, gun lubricant, etc... tell us about it!
End User reviews only.

Fobus holster for CPX-2

Postby blueridgerunner » Sat Dec 21, 2013 2:12 pm

I've found that the Fobus TA-M or TAM is an exact fit for the CPX-2.

Image
blueridgerunner
New Member
 
Posts: 28
Joined: Mon Dec 16, 2013 12:38 pm

Re: Fobus holster for CPX-2

Postby madmax » Sat Dec 21, 2013 8:52 pm

I have the same holster and use it all the time great holster.
Max
USCG Ret.
User avatar
madmax
Veteran Member
 
Posts: 590
Joined: Wed Aug 08, 2012 7:35 am
Location: Coeur d Alene Idaho

Re: Fobus holster for CPX-2

Postby blueridgerunner » Mon Dec 23, 2013 9:31 am

Got an email from Fobus saying they don't make a holster for the cpx-2. I offered to send the picture to prove it. Had it not been for this forum I wouldn't have known.
blueridgerunner
New Member
 
Posts: 28
Joined: Mon Dec 16, 2013 12:38 pm

Re: Fobus holster for CPX-2

Postby wknight40 » Mon Dec 23, 2013 10:46 am

Fobus may be telling the truth in that they do not make one specifically for the SCCY. They may also not be aware that this particular holster fits the SCCY so well.
wknight40
Veteran Member
 
Posts: 285
Joined: Mon Jul 01, 2013 5:13 pm

Re: Fobus holster for CPX-2

Postby blueridgerunner » Mon Dec 23, 2013 1:05 pm

wknight40 wrote:Fobus may be telling the truth in that they do not make one specifically for the SCCY. They may also not be aware that this particular holster fits the SCCY so well.

My guess is you're correct. I answered their email and sent the picture along.
They do list a holster for the 1st generation pistols, but they are too small for the new models. Mine wouldn't snap in that one correctly. The TA-M does list several pistols such as a Taurus etc.
blueridgerunner
New Member
 
Posts: 28
Joined: Mon Dec 16, 2013 12:38 pm

Re: Fobus holster for CPX-2

Postby babsc01 » Fri Dec 27, 2013 10:39 pm

I purchased the TAM for my CPX-2, and I carry it daily with that holster. It fits wonderfully now, but was a little tight when i first got it. After some regular use and some work-in, it's now my holster of choice.

I also sent a note to Fobus telling them about the perfect fit. I've not heard back from them but wasn't really expecting to.
Smith & Wesson SD9 VE
SCCY CPX-2 Gen 2
Hi-Point JCP .40 S&W
Kahr CW9 (wifey's carry)
Ruger SR22
Remington 597 .22LR Rifle
Stevens Model 320 Security 12-gauge Shotgun
User avatar
babsc01
Seasoned Member
 
Posts: 168
Joined: Tue Apr 30, 2013 7:04 pm

Re: Fobus holster for CPX-2

Postby blueridgerunner » Sat Dec 28, 2013 3:22 pm

babsc01 wrote:I purchased the TAM for my CPX-2, and I carry it daily with that holster. It fits wonderfully now, but was a little tight when i first got it. After some regular use and some work-in, it's now my holster of choice.

I also sent a note to Fobus telling them about the perfect fit. I've not heard back from them but wasn't really expecting to.

Heck, I even sent the picture. Oh well, losing out on potential sales is not my problem. :bash:
blueridgerunner
New Member
 
Posts: 28
Joined: Mon Dec 16, 2013 12:38 pm

Re: Fobus holster for CPX-2

Postby Unown » Fri Jan 03, 2014 8:40 pm

I ordered a Fobus TAM today. It will be my first paddle holster. I have an NRA small belt slide holster that I really like, I am looking forward to getting The Fobus. I also ordered an UPULA mag loader. Should be here first of the week. I have several holsters that I use at different times. The TAM looks like it may carry my CPX2 higher which I was looking for. I know that several people use the TAM and was wondering what your thoughts are.
EDC CPX2 CB
DOB: 05/15/2013
We are advised by the present administration to NOT judge ALL Muslims by the actions of a few, but we are encouraged to judge ALL gun owners by the actions of a few.
User avatar
Unown
Seasoned Member
 
Posts: 120
Joined: Fri Aug 09, 2013 6:47 pm

Re: Fobus holster for CPX-2

Postby Unown » Mon Jan 06, 2014 8:19 pm

I got my Fobus TAM today, very comfortable. It clicks right in and clicks right out. Just the right amount of retention. I am gonna give it a good workout at the range tomorrow. Just in the right spot for easy re-holstering. Thank you for finding it whoever did. I have seen a few posts so I don't know who to give the credit too.
EDC CPX2 CB
DOB: 05/15/2013
We are advised by the present administration to NOT judge ALL Muslims by the actions of a few, but we are encouraged to judge ALL gun owners by the actions of a few.
User avatar
Unown
Seasoned Member
 
Posts: 120
Joined: Fri Aug 09, 2013 6:47 pm

Re: Fobus holster for CPX-2

Postby jefm464 » Wed Jun 11, 2014 9:31 pm

hey ya'll, new to the site & kinda new to the gun world in general... Just wanted to say a HUGE thank you for putting up the holster list !!! I've been all over Chattanooga looking for a holster ( trying to avoid ordering online ) & still haven't found one so it looks like I may have to give in sooooo again, Thank you !
jefm464
New Member
 
Posts: 4
Joined: Wed Jun 11, 2014 12:40 pm

Re: Fobus holster for CPX-2

Postby sccytoter » Fri Jun 13, 2014 2:48 pm

babsc01 wrote:I purchased the TAM for my CPX-2, and I carry it daily with that holster. It fits wonderfully now, but was a little tight when i first got it. After some regular use and some work-in, it's now my holster of choice.

I also sent a note to Fobus telling them about the perfect fit. I've not heard back from them but wasn't really expecting to.
Lol. Check their website in a while, and they will probably list it as a fit for the CPX-2. Lol.
Semper Fi Mac!
User avatar
sccytoter
Veteran Member
 
Posts: 655
Joined: Wed Apr 18, 2012 11:53 pm
Location: Indiana

Re: Fobus holster for CPX-2

Postby jefm464 » Sun Jun 15, 2014 9:57 am

Another Fobus Holster that works well is the GL-2ND ...Originally for Glocks ( who knew ) ... You have to tighten down the retention screww a little but the fit is very good !! :D
jefm464
New Member
 
Posts: 4
Joined: Wed Jun 11, 2014 12:40 pm

Re: Fobus holster for CPX-2

Postby GoesBang » Sun Jun 15, 2014 11:17 pm

Of course the perfect Fobus is the KTP11

http://www.fobusholster.com/products/KE ... 62-16.html
SCCY CPX-2-CB s/n 085x (Born on 4/25/13) Receiver replaced 3/14 s/n 129x
Ruger P95PR
Henry Golden Boy H004
Kel-Tec P11/P40
RIA 1911 Tactical FS 45 ACP
RIA M206 38 Special 2"

USMC 1976-79 3rd MAW Camp Pendleton, CA
HTTP://www.X-CalibearUSA.com
User avatar
GoesBang
Veteran Member
 
Posts: 864
Joined: Tue Sep 03, 2013 10:42 pm
Location: NE Missouri

Re: Fobus holster for CPX-2

Postby madmax » Sun Jul 27, 2014 9:15 am

GoesBang wrote:Of course the perfect Fobus is the KTP11

http://www.fobusholster.com/products/KE ... 62-16.html


Sorry to tell you but the KTP11 does not work on the CPX-2 without modifying the holster.
Max
USCG Ret.
User avatar
madmax
Veteran Member
 
Posts: 590
Joined: Wed Aug 08, 2012 7:35 am
Location: Coeur d Alene Idaho


Return to Product User Reviews

Who is online

Users browsing this forum: No registered users and 1 guest

Join Florida Carry