Multiple FTFeed & Sear not releasing on new CPX-2

Reports from the Firing Line. Let us know how the shooting went and don't forget to post some pictures!

Multiple FTFeed & Sear not releasing on new CPX-2

Postby shootsacanon » Sat Jul 15, 2017 6:09 pm

Just got back from my first range trip with a new CPX-2. Out of a box of 50, I had to "assist" the slide into battery about 15 times or so. Pre-purchase research suggested I might encounter this, but I didn't expect it to that extent. For those of you who have had this, does it self-correct over time, or what's the fix?

More troubling, was that hammer stopped releasing at full trigger press. Trigger back, hammer back, release tigger, hammer forward, repeat. Sometimes the hammer would release on the second pull in a cycle. These were all full trigger pulls, with the trigger bottoming out against the frame. This is a factory-new gun, so I'm wondering if anyone else has experienced this. If so, what's the diagnosis & prescription? Thanks!
New Member
Posts: 2
Joined: Sat Jul 15, 2017 3:37 pm

Re: Multiple FTFeed & Sear not releasing on new CPX-2

Postby DrJosh » Mon Sep 04, 2017 2:26 pm

Ever figure this out?
Send it back for service?
New Member
Posts: 7
Joined: Mon Jul 24, 2017 7:53 pm

Return to Range Reports

Who is online

Users browsing this forum: Google [Bot] and 2 guests

Join Florida Carry