Belt clip

Forum for the discussion of SCCY CPX-1 & CPX-2 compact 9mm and CPX-3 subcompact .380 ACP pistol modifications, holsters, and other after-market items.

Belt clip

Postby mammahc » Tue Dec 09, 2014 7:40 pm

Anyone have first hand experience with this clip on a cpx 2
New Member
Posts: 5
Joined: Tue Dec 09, 2014 7:30 pm

Re: Belt clip

Postby getvicious » Wed Dec 10, 2014 1:38 pm

Techna doesn't list one for either CPX nor is SCCY in their list of "9 New Clips Coming Soon." All theirs seem to go for $35.

I watched a YouTube video of a guy installing a Techna clip on a LC9. Went on easily on the right side of the pistol - a screw post replaces the rear frame pin on the LC9. That type of install would work on a CPX-2 but not a CPX-1.

I've seen other brands of clips that are generic and attach with super tape (the stuff that sticks strongly but you can remove by stretching it out from under the thing being taped on). Clipdraw has a universal one for $20.

I'm leery of the comfort of carrying that way (all naked and exposed...), the lack of protection afforded by a holster and the durability of the tape on the universal type.

A fast eBay search found a universal Clipdraw for $15 with free shipping.

I'm going to have to think about that. At $15 it might make a nice stocking-stuffer to myself.... 8)

These two sites speak well of the universal clip and carrying your pistol that way.
It's not the blast that kills you - It's the tumble to the bottom of the 800 foot crater.....
User avatar
Topic Moderator
Posts: 3149
Joined: Sat May 08, 2010 10:16 pm

Re: Belt clip

Postby dancaudill » Thu Jan 08, 2015 11:02 am

I had one on my lcp..loved it..
New Member
Posts: 1
Joined: Thu Jan 08, 2015 10:45 am

Re: Belt clip

Postby wknight40 » Thu Jan 08, 2015 5:49 pm

That particular design may not work on the SCCY. I believe it will cover the area where the hammer comes back. I could be wrong though.
Veteran Member
Posts: 285
Joined: Mon Jul 01, 2013 5:13 pm

Re: Belt clip

Postby bombero437 » Sun Feb 08, 2015 10:39 am

I put one on mine (FDE/Black) and on my girlfriends (Pictured) on the right side of the frame not the slide and it works just fine. it works best if im wearing a tucked in shirt and another shirt or jacket or sweater over it. It also fits in my IWB holster with no issues at all.

New Member
Posts: 4
Joined: Thu Nov 27, 2014 9:29 am

Re: Belt clip

Postby derekallen24 » Wed Feb 18, 2015 1:52 am

Would u mind sharing where u got the clip for the cpx2 that's showing in the photo and any thing else thatthat's needed for installation. Thanks
New Member
Posts: 9
Joined: Mon Feb 09, 2015 10:40 pm

Re: Belt clip

Postby VAPREACHER » Fri Apr 01, 2016 5:59 pm

Do yourself a favor & get the best clip you can. I had a Keltec P11 on a belt clip from KelTec. In a crowded store the belt clip broke, my P11 ran down my pants leg & came squirting out in the middle of a flock of blue haired old ladies! KelTec sent another one but my P11 lived IWB after that.
New Member
Posts: 12
Joined: Wed Feb 17, 2016 11:10 pm

Return to SCCY CPX-1, CPX-2, & CPX-3 Accessories

Who is online

Users browsing this forum: No registered users and 1 guest

Join Florida Carry